This is just a sample of the many antiques we have sold. Click link to see other Sales Archive Pages on this Site.
We can help you sell quality Antiques Contact Us.
For further info on consigning / selling your antiques
with us please see our FAQ page,
the
Appraisal / Selling Page and the
Selling
Your Collection Pages.
Our current offering of Antiques for sale are at our sister Website Patented-Antiques.com.
Barnes
#6 Scroll Saw The
operation of this model is different from most of those encountered in that
it derives its power from a small round leather belt and pulley system instead of
the springy wooden arms which are typical on these saws. This example is in
very nice condition and has no major casting problems or breaks. There is
still considerable pin striping on the body, and it displays very nicely.
Good . . . . . . $695.00 SOLD
Barnes #3 Pedal Powered Antique 5' Lathe This is a super nice example of Barnes's largest and most popular pedal powered lathe. Over the years it was offered in several different configurations, with this being the final version. Barnes stopped production of these in the late 20's due to a number of considerations including the depression, and the fact that electricity was becoming available in remote places. They came in several lengths with this being the 5' model. The condition of the working parts is excellent, tight and ready to again perform any lathe related task given to it. All parts are original except for the rod to hold the seat up, and there is one small weld repair to the butterfly shaped bracket that holds the main shaft to the leg assembly. The belt will need to be replaced but is whole for the moment. The head stock and tailstock show little signs of wear or even use and are tight and nice. The tool rest which is the larger version is nice as well. These are not found very often, and the condition and functionality is great.
Good . . . . . $2495.00 SOLD
Marshall Jeweler's Lathe with Collets and Accessories This entire Jeweler's or Watchmakers Lathe setup appears to be in very nice condition. Jeweler's or Watchmakers lathes are typically pretty easy to find, it is the accessories that can be elusive and cost a small fortune. This one comes with about everything you would need to have a complete and working setup. The motor is there and running, it has a tool rest, the head, the tailstock, a three jaw chuck, a couple other chucks or faceplates mounted down below, a cross feed, approx 60 collets and a drawer full of misc parts and accessories. Everything appears to be running smoothly with no apparent damage or problems that you need to hear about. Most of the collets I looked at are marked Peerless and are in excellent condition with no signs of rust or excessive use. All in all a very nice set-up, and if you are looking for a complete and working setup to start a shop or add to the existing shop you need look no further.
Good . . . . . . $695.00 SOLD
Small
Treadle Powered Lathe This small lathe
is in very nice condition, and there are no casting breaks in the frame or foot
pedal. It is unmarked as to manufacturer, but is typical of the many different
styles that were available back near the turn of the last century.
Good . . . . . . $295.00 SOLD
Goodell
Pratt Lathe This Goodell Pratt small lathe is in very nice condition,
and there are no casting breaks in the frame.
Good . . . . . $295.00 SOLD
Star
Pedal; Powered Jigsaw Star Jigsaw has been restored.
It looks pretty good and seems to be operable. I believe the table has
been recast / replaced. It has a lip at the edge and so might be right and
just buffed up for the restoration. Note that under the arm there is a tube
and rod affair. This looks to be a recreation to represent what i assume was
a blower to blow the dust from the work. The rest of this saw looks great
and it is a very graphic and showy piece with its flared leg design and paint decoration.
There is patent info up near the top, and a lot of original paint and decoration
remain there.
Good . . . . $495.00 SOLD
Lathe
/ Jigsaw Combination This has been restored as well. It too seems
to be in operating condition, and the unusual little lather attached up front looks
original and operational as well. It will need a belt to make it work though.
The foot pedal looks to be a later wooden replacement. The tool box attached
to the frame does not look original to me. I believe the table may be a replacement
as well.
Good . . . . . $395.00 SOLD
Hobbies
Jigsaw This Jigsaw is as found. It looks pretty good and
seems to be operable. It seems to just need a cleaning and to be tightened
up, or bolted down.
Good . . . . . $295.00 SOLD
Barnes
Velocipede #2 Jigsaw This pedal powered
Barnes jigsaw has been sitting on the same shelf for over 20 years. It was
repainted and restored when bought, and has sat idly waiting for its time
to come. The shelf is about 8' up in the air so it was a bit difficult to
get any real good shots. I could not see any repairs or evidence of welding,
but could not get all the way around it. Both the buyer (a collector), and
seller (another collector), were old time tool collectors, and any major mechanical
defects would have been addressed before raising it to this resting place.
These Barnes Velocipede model jigsaws are becoming very hard to find
these days. The price assumes there is nothing materially wrong, and if truly
interested I can give you more detailed info.
Good . . . . . . $295.00 SOLD
Barnes
#7 Pedal Jigsaw This pedal powered Barnes
jigsaw is a bit less complex than the Velocipede offered above and was the more
common model sold as it was less expensive. This saw needs a bit of restoration
and reassembly. The original top needs to be glued back up, the belt is missing
and the rod from the pedal needs to be replaced. There is lots of original paint and decoration left, and the previous owner has applied a coat of clear lacquer or the like to protect it. This one will make a fine user with a little effort.
Good . . . . . . $695.00 SOLD
This is just a sample of the many antiques we have sold. Click link to see other Sales Archive Pages on this Site.
We can help you sell quality Antiques Contact Us.
For further info on consigning / selling your antiques
with us please see our FAQ page,
the
Appraisal / Selling Page and the
Selling
Your Collection Pages.
Our current offering of Antiques for sale are at our sister Website Patented-Antiques.com.
This website is Copyrighted
(1998 -
2009)
Larry & Carole Meeker