Meeker's
Mechanical
Nature Antiques
Larry and Carole
Meeker

Purveyors of Americana
Patented & Mechanical Antiques
www.AntiqBuyer.com

Contact Us At
AntiqBuyer@gmail.com




Vintage Collectible
BCT / Bridge City Tool Co. 
& Lie Nielsen Tools

Past Sales Archive

This is just a sample of the many antique & vintage tools we have sold.
Click link to see other Sales Archive Pages on this Site.

We Buy Quality Antique Tools
Contact Us at AntiqBuyer@gmail.com

Special Note Concerning Prices Seen Below:
Most prices seen reflect actual sale results from this website.
Prices seen span a long time and may not reflect current values.  Some are selling for more, many now sell for less.
On other pieces you will see no price, or a price range, with or without an explanation.  The reasons for that are discussed on the FAQ page.

Our current offering of Antiques for sale are at our sister Website Patented-Antiques.com.


BCT / Bridge City Tool Works
Bevels & Misc. Tools


Bridge City Tool Works PV-1 Pin ViceBridge City Tool Works PV-1 Pin Vice  Signature Series from 1999. Rosewood. Minty nice never used!!

Fine . . . . . 175.00        SOLD!!









Bridge City Tool Works BL-9 Bench LevelBridge City Tool Works BL-9 Bench Level Bought new in 1994. Some light tarnish in places where wood meets brass. Minty nice / never used!!

Fine . . . . . $150.00         SOLD!!








Bridge City Tool Works JS-6 Saw w/ 1 Spare Blade plus 2 other bladesBridge City Tool Works JS-6 Saw w/ 1 Spare Blade plus 2 other blades This BCT JS 6- Saw is a 2001Signature series. Bought new and never used. There is one saw blade in the handle and an extra JS 6 blade.

The other two blades fit a different handle I do not have. One is is the JS-5 Dozuki, and 1 is a JS 4.

Fine . . . . . $250.00 / Lot        SOLD!!






Bridge City Tool Works SS-4 Saddle SquareBridge City Tool Works SS-4 Saddle Square  Minty nice never used!!

Fine . . . . . $120.00                 SOLD!!









Bridge City Tool Works BS-5 Transfer Bevel SquareBridge City Tool Works BS-5 Transfer Bevel Square  1994 Signature Series. Minty nice never used!!

Fine . . . . . $100.00         SOLD!!









Bridge City Tool Works CT-3 Rosewood Inclinometer LevelBridge City Tool Works CT-3 Rosewood Inclinometer Level Commemorative Tool No. 3. Minty nice never used!! Signature Series. Rosewood. Bought new in 1995. Fashioned after the famous Davis Mantle Clock style level.

Fine . . . . . $200.00         SOLD!







Bridge City Tool Works 1997 Commemorative Tool # 5 Hand ViseBridge City Tool Works 1997 Commemorative Tool # 5 Hand Vise Nice!! The original owner bought this new in 1997 and it has sat in its box unused and untouched for years. The foam interior of the original box was turning to dust and I removed most of it. The polished steel portion developed some spotting where specks of the foam sat on the tool. I rubbed it a bit with 000 steel wool, and it could use more to get rid of the spots completely.

This hand vise is a fine example and wants to go to work.

Fine . . . . . $195.00       SOLD!!





Bridge City Tool Works CS-12 Combination SquareBridge City Tool Works CS-12 Combination Square Rosewood. 1996 Signature Series. Minty nice never used!!

Fine . . . . . $250.00       SOLD!!










Bridge City Tool Works TT-1 Turning TreeBridge City Tool Works TT-1 Turning Tree The BCT Turning Tree was first offered in 1992. An interesting measurement tool for use with outside calipers.

From the Legend page on the BCT site.

TT-1 TURNING TREE The TT-1 Turning Tree is made in nine sections. Individual sections can be removed and kept in your apron pocket as quick references until your turning job is completed. We recommend you don't place this precision tool on the outboard end of your lathe while you turn, lest it vibrate onto the floor. All sections nest together, sturdy as a tree, awaiting your calipers. The major diameter of each section is permanently marked with the diameters of all four cylinders which make up that particular section. You'll know at a glance which section contains the diameter to match the drill you used to make the mortise. Additionally, the TT-1 Turning Tree sections can be used to size existing holes. Simply grab the section which closely resembles the hole you wish to measure and drop the narrow end into the hole until you find the size which fits. This can be extremely helpful in repairing antiques or making replacement parts.

Minty nice never used.

Fine . . . . . $150.00         SOLD!!






Bridge City Tool Works BS-10 Transfer Bevel SquareBridge City Tool Works BS-10 Transfer Bevel Square  1994 Signature Series. Minty nice never used!!

Fine . . . . . $80.00      SOLD!!









Bridge City Tool Works MS-1 Miter SquareBridge City Tool Works MS-1 Miter Square   Early Rosewood. Minty nice never used!!

Fine . . . . . $50.00          SOLD!!







Bridge City Tool Works MS-1.5 Miter SquareBridge City Tool Works MS-1.5 Miter Square 1992 Signature Series. Rosewood. Some storage tarnish.  Otherwise minty nice and never used!!

Fine . . . . . $60.00          SOLD!!







Bridge City Tool Works MS-3 22 Degree Miter SquareBridge City Tool Works MS-3 22 Degree Miter Square  1992 Signature Series. Minor tarnish from storage. Minty nice never used!!

Fine . . . . . $50.00          SOLD!!







Bridge City Tool Works TB-3 T BevelBridge City Tool Works TB-3 T Bevel Upgrade Rosewood. Minty nice never used!!

Fine . . . . . 125.00          SOLD!!









Bridge City Tool Works PG-10 Profile Gage Bridge City Tool Works PG-10 Profile Gage Rosewood. Minty nice never used!!

Fine . . . . . 125.00             SOLD!!








Bridge City Tool Works MG-3 Marking GageBridge City Tool Works MG-3 Marking Gage Bought new in 1997 and was never used. Rosewood. Minty nice!!

Fine . . . . . $160.00      SOLD!!









Bridge City Tool Works DG-2 Depth Gauge w/ StopBridge City Tool Works DG-2 Imperial Depth Gauge w/ HG-2 - Height Gage  Offered in 1991. Complete with aux. HG-2 Height Gage. Minty nice never used!!

Fine . . . . . $150.00         SOLD!!







Bridge City Tool Works TB-6 BevelBridge City Tool Works TB-6 Bevel Super nice unused condition!! Signature series. The original owner bought this new in 2003 and it appears to be unused. A useful shop tool. Sweet!!

Fine . . . . . $175.00       SOLD!!








Bridge City Tool Works TB-2 Angle BevelBridge City Tool Works TB-2 T Bevel  Minty nice never used.

Fine . . . . . $120.00     SOLD!!








Bridge City Tool Works TB-1 T BevelBridge City Tool Works TB-1 T Bevel Minty nice never used.

Fine . . . . . $75.00        SOLD!!









Bridge City Tool Works TB-5 T BevelBridge City Tool Works TB-5 T Bevel  2002 Signature Series. Rosewood. Minty nice never used!!

Fine . . . . . $375.00        SOLD!!








Bridge City Tools TB-1 BevelBridge City Tool TB-1 Bevel  Nice!! Some box scuffs.

Fine . . . . . $95.00        SOLD!!









Bridge City Tool Works AMP-6 I Angle Master ProBridge City Tool Works AMP-6 I Angle Master Pro  2002 Signature Series. Complete w/ extra box of guides and the wooden set-up gage. There is also a 3 ring binder with an unopened booklet of - - - ? The instructions or description on the website were above my pay grade, I use to deal in 1/8" in most situations when I was a general contractor, not the increments / sizes they talk about using this.

Minty nice never used!!

Fine . . . . . $175.00            SOLD!!






Bridge City Tool TB-4 Complimentary Angle BevelBridge City Tool TB-4 Complimentary Angle Bevel  This is in very nice condition.  It is a Signature Series issue and dates from 1997.   For some reason Bridge City sent him extra blades and mounting screws for this tool  The tool itself looks to be basically unused.  It includes the instructions and the certificate of authenticity.   Very Nice!!  

Fine . . . . . $125.00   SOLD!!


BCT / Bridge City Tool Works
Squares
& Misc. Tools




Bridge City Tools AS-14 Adjustable 14 Inch SquareBridge City Tool AS-14 Adjustable 14 Inch Square Bought new in 1994.  Signature Series. Never used. Minty nice with all the paperwork, COA, etc.   # 1757 of 3,000.  Box scuffs.

Fine . . . . . $275.00        SOLD!!









Bridge City Tool CS-12 Combination Square / RuleBridge City Tool CS-12 Combination Square / Rule w/ Both CS-12 & CS 18 Rule  This is a 1996 Signature Series model. It is in very nice condition in its original box. The tool looks to be unused. The loose CS-18 rule is included or can be bought separately. Nice!!

Fine . . . . . w/ both Rules. . . . . $295.00         SOLD!!







Bridge City Tools CS-6 Combination SquareBridge City Tools CS-6 Combination Square  Nice!! The box and blade call it off as a CS-6, but it is more like a DS-6 double square.  Other CS-6 squares have the 45 degree handle. They must have changed the designation later on as this one is from the 1990s.  Some box scuffs.

Fine . . . . . $175.00          SOLD!!







Bridge City Tool AS-14 Adjustable Try SquareBridge City Tool AS-14 Adjustable Try Square   This is in very nice condition in the original box w/ instructions and certificate of authenticity.  It is a Signature series from 1997.   A nice piece.   

Fine . . . . . $175.00    SOLD!!








Bridge City Tool CS-6 Combination SquareBridge City Tool Works CS-6 Combination Square  Original box.  The tool it self looks to be unused. It is not dated.  A solid, well built, well designed, tool. Nice!!  

Fine . . . . . $125.00    SOLD!!








Bridge City Tool CS-6 Combination SquareBridge City Tool CS-6 Combination Square   This is in very nice condition.  The owner displayed his Bridge City Tools and stored the boxes elsewhere. The tool looks to be unused.

Fine . . . . . 175.00        SOLD!!







Bridge City Tool Works DS-6 Double SquareBridge City Tool Works DS-6 Double Square  Rosewood. 1999 Signature Series. Minty nice never used!!

Fine . . . . . $175.00       SOLD!!









Bridge City Tool CS-6 Combination Square Bridge City Tool CS-6 Combination Square Nice!! Little used. It seems to be in the wrong box that is labeled TS 1.5.  Some box scuffs.

Fine . . . . . $200.00          SOLD!!









Bridge City Tools MS-3 22.5 Degree Miter SquareBridge City Tool AS-3 Adjustable Square   1994 Signature Series. Unused. Minty Nice!! Some box scuffs.

Fine . . . . . $125.00       SOLD!!









Bridge City Tool AS-5 Adjustable 5 SquareBridge City Tool AS-5 Adjustable 5" Square   This is new in the Box / Unused. It is from the Signature Series and dates from 1995. The tool looks to be unused.  It includes the instructions and the certificate of authenticity.   A nice piece.

Fine . . . . . $125.00      SOLD!!








Bridge City Tool AS-7 Adjustable Try SquareBridge City Tool AS-7 Adjustable Try Square   This is in very nice condition in the original box w/ instructions and certificate of authenticity.  It is a Signature series from 1997.   A nice piece.

Fine . . . . . $150.00      SOLD!!








Bridge City Tool Works AS-9 Adjustable SquareBridge City Tool Works AS-9 Adjustable Try Square  This BCT 9" Square is in very nice condition.  It is a 1993 Signature Series.  Like new / unused.  

Fine . . . . . $125.00       SOLD!!







Bridge City Tool Works US-6 Universal SquaresBridge City Tool Works US-6 Universal Squares  Super nice unused condition still in their wraps!!  The original owner bought these  Signature Series Squares new as a set in 2001. There are 3 sizes. The ultimate speed square for precise layouts.

From the BCT Legend page
These squares are accurately machined on CNC milling machines and feature precisely laser-etched graduations. The Universal Square is super handy and fits perfectly in your apron pocket. Perhaps the most versatile tools in our catalog, Universal Squares can be used almost anywhere. They're called Universal because each of our three sizes (3 inch, 4 inch or 6 inch) shares the following features:
Ruler
Height Gage
Marking Gage
Centering Rule
Hook Rule
Protractor
Power Tool Guide

Fine . . . . . $175.00 / Lot    Want Just One - ASK       SOLD!!



Bridge City Tool Works AMS-1 Adjustable Miter SquareBridge City Tool Works AMS-1 Adjustable Miter Square  1997 Signature Series. Rosewood. Minty nice never used!!

Fine . . . . . $175.00        SOLD!!








Bridge City Tools TS-1 Joint Makers SquareBridge City Tool TS-1 Jointmakers Square  Nice!!  Some box scuffs.

Fine . . . . . $70.00         SOLD!!








Bridge City Tool Works TS-3 Double SquareBridge City Tool Works TS-3 Double Square  Early model w/ Rosewood handle. Box scuffs. Minty nice never used!!

Fine . . . . . $60.00       SOLD!!










Bridge City Tools MS-2 Miter SquareBridge City Tool MS-2 Miter Square   Some oxidized tarnish / patina from sitting in the box 30 or so years. Basically unused.  Some box scuffs.

Fine . . . . . $70.00      SOLD!!








Bridge City Tool Works TS-2 Master Try SquareBridge City Tool Works TS-2 Master Try Square   Rosewood. Minty nice never used!!

Fine . . . . . $75.00          SOLD!!










Bridge City Tool Works MS-2 Miter SquareBridge City Tool Works MS-2 Miter Square  Rosewood. Minty nice never used!!

Fine . . . . . $70.00       SOLD!!









Bridge City Tools MS-1 Miter SquareBridge City Tool MS-1 Miter Square  Nice!!   Unused. Some box scuffs.

Fine . . . . . $80.00      SOLD!!









Bridge City Tools MS-3 Miter SquareBridge City Tool MS-3 22.5 Degree Miter Square   Unused. Minty Nice with some tarnish from storage. COA. Some box scuffs.

Fine . . . . . $80.00      SOLD!!










Bridge City Tools TS-2 Try SquareBridge City Tool TS-2 Try Square Nice!! Unused. Some box scuffs.

Fine . . . . . $70.00        SOLD!!







Bridge City Tool Works TS-1.5 Try SquareBridge City Tool Works TS-1.5 Try Square Signature series from 1992. Some tarnish where wood meets brass, but otherwise minty nice never used.

Fine . . . . . $125.00       SOLD!!








Bridge City Tool MS-2 Miter SquareBridge City Tool MS-2 Miter Square  This is in very nice condition.   The tool looks to be basically unused.  A nice piece.   

Fine . . . . . $125.00   SOLD!!







Bridge City Tools MS 1.5 Miter SquareBridge City Tool MS 1.5 Miter Square Signature Series. 1992. The collectors ID # was 832.  Unused.  COA. Some box scuffs.

Fine . . . . . $95.00          SOLD!!










Bridge City Tools Saddle Square2 Bridge City Tools Saddle Squares  Great.  Nice patina!! The original owner bought these new in the 1990s, put them out on the bench and walked away.  They have sat on a workbench untouched for years. He saved the original box for one, I could not find the box for the other. Minty nice!!

4" - Fine . . . . . $100.00           SOLD!!

2" - Fine . . . . . $75.00           SOLD!!








Bridge City Tool Squevel - Bevel SquareBridge City Tool Squevel - Bevel Square CT-1, the 1993 Signature Series Bridge City Tool Works Commemorative Squevel was the 1st Commemorative Tool that BCT offered.

This fact is explained in the letter that came with it. Also included is the COA, and box. This is a Rosewood model and numbered 1202 R. A fine tool. Shows no sign of use. A bit of tarnish otherwise minty nice. Minor box scuffs. A true collectors piece.

Fine . . . . . $150.00        SOLD!!






Bridge City Tool Works SS-2 Saddle SquareBridge City Tool Works SS-2 Saddle Square  Minty nice never used!!

Fine . . . . . $75.00        SOLD!!












Bridge City Tool Saddle Squares2 Bridge City Tool Saddle Squares  Both are in very nice condition and have their original boxes. One is offset, and the other has the same length legs. They look to be unused. Nice.

Good + . . . . . $150.00 / Pair      SOLD!!







Bridge City Tool Mitre SquareBridge City Tool MS-2 Mitre Square  The owner of this square liked nice tools. He ordered a lot from both Bridge City Tools and Lie Nielson.  He also bought some quality Stanley stuff from top dealers.  A lot of it is still in the original boxes and shows little if any sign of use.  This square is like new, and probably 15 to 20 years old, and no longer offered by Bridge City Tool Works that I can tell.

Fine+ . . . . . $150.00          SOLD!







Bridge City Tool TS-1 Try SquareBridge City Tool TS-1 Try Square  The owner liked nice tools. He ordered a lot from both Bridge City Tools and Lie Nielson.   This square is like new, and probably 15 to 20 years old in its original box.

Fine + . . . . . .$95.00        SOLD!









Bridge City Tool SquevelBridge City Tool Squevel  This combination Square & Bevel is new in the Box / Unused. It is Bridge City Tool Companies  No. 1 Commemorative dating from 1993. The tool looks to be unused.  Nice!! 

Fine . . . . . 175.00    SOLD!!







Bridge City Tools BS-10 Transfer Bevel SquareBridge City Tool BS-10 Transfer Bevel Square 1994 Signature Series.  Nice!! Unused. Some box scuffs.

Fine . . . . . $140.00         SOLD!!








Bridge City Tools BS-5 Bevel SquareBridge City Tool BS-5 Bevel Square 1994 Signature Series.  Nice!! Unused. Some box scuffs.

Fine . . . . . $125.00      SOLD!!





BCT / Bridge City Tool Works
Dovetail Squares
& Misc. Tools


Bridge City Tool Works SS-DT Dovetail Saddle SquareBridge City Tool Works SS-DT Dovetail Saddle Square  A versatile tool for making dovetails eliminating the need for a typical square & bevel when laying out dovetails. 1998 Signature series.  Minty nice never used.

Fine . . . . . $175.00        SOLD!!







Bridge City Tool Works HDS-2 Dovetail SquareBridge City Tool Works HDS-2 Dovetail Square Minty nice never used.

Fine . . . . . $75.00        SOLD!!









Bridge City Tools DS-1 Dovetail SquareBridge City Tool 8:1 HDS-1 Dovetail Square Nice!! Unused. Some tarnish & box scuffs.

Fine . . . . . $75.00         SOLD!!







Bridge City Tools DS-2 Dovetail SquareBridge City Tool DS-2 Dovetail Square 6:1 Unused. Minty Nice!! Some box scuffs.

Fine . . . . . $75.00         SOLD!!









Bridge City Tool Works Dovetail SquareBridge City Tool Works Dovetail Square    This interesting little square looks to have never been used.  Just the thing for laying out hand cut dovetails.  There is some minor spots of tarnish.   A nice piece.

Good + . . . . . $65.00       SOLD!!






BCT / Bridge City Tool Works
Levels
& Misc. Tools


Bridge City Tool CT-2 SqueveLevelBridge City Tool CT-2 SqueveLevel This is in very nice condition.  It is Bridge City Tool's 2nd Commemorative Tool issued in 1994.  It is a discontinued tool, and considered scarce.   It combines a square, bevel & level into one tool.  It is in the original box. The certificate of authenticity is included.   Super!!   

Fine . . . . . $150.00    SOLD!!









Bridge City Tools 1995 Commemorative Inclinometer Level CT-3Bridge City Tools 1995 CT-3 Commemorative Inclinometer Level  These special issue inclinometers were issued / sold only to established customers as a reward of sorts!  Highly collectible.  Very nice!!

Fine . . . . . . . $250.00         SOLD!!








Bridge City Tool CT-3 Inclinometer / LevelBridge City Tool CT-3 Inclinometer / Level  This is in very nice condition.  It is Bridge City Tool's 3rd Commemorative issued in 1993.   The inclinometer looks to be unused.  It is in the original box. The instructions and certificate of authenticity are included.   A nice piece.

Fine . . . . . $250.00         SOLD!!







Bridge City Tool BL-9 Bench LevelBridge City Tool BL-9 Bench Level  This is in very nice condition.  It is Bridge City Tool's 1993 Signature Series.   It looks to be unused but does have some light wear, scratches, & tarnish.   The original box is present. A nice piece.

Fine . . . . . $150.00          SOLD!!


BCT / Bridge City Tool Works
Misc. Tools


Bridge City Tool CS-18 Combination Square RuleBridge City Tool CS-18 Combination Square Rule  This is just the rule that will fit into their combination square.  It is still in its wax paper wrap.  Never been used.

CS-18 Rule - - - -  Fine . . . . . $55.00          SOLD!!





Bridge City Tools SA-1 Scratc AwlBridge City Tools SA-1 Scratch Awl   Unused.  Some box scuffs.

Fine . . . . . $75.00           SOLD!!









Bridge City Tools SA-2 Scratch AwlBridge City Tools SA-2 Scratch Awl   Unused.  Some box scuffs.

Fine . . . . . $95.00           SOLD!!










Bridge City Tools MG-3 Marking GageBridge City Tools MG-3 Marking Gage Nice!! Unused. Some box scuffs.

Fine . . . . . $175.00          SOLD!!









Bridge City Tool Works CS 1 Centering ScribeBridge City Tool Works CS 1 Centering Scribe Super nice unused condition!! In box w/ paperwork. The original owner bought this new in 1992 and it appears to be unused. Includes an extra point. Very Nice!!

Fine . . . . . $150.00          SOLD!!









Bridge City Tool Works CT 6 Hand DrillBridge City Tool Works CT 6 Hand Drill Super nice unused condition!! The original owner bought this CT 6 Commemorative drill new in 1998 and opted for all the upgrades being Rosewood handles and the Walnut storage box. See the paperwork for other options. It was produced to commemorate the Bridge City Tool Works 15th anniversary and was a one time limited offering. This CT-6 drill has sat in its box unused and untouched for years. The foam interior is still good. Very Nice!!

Fine . . . . . $575.00        SOLD!!






Bridge City Tool Works MP-8 ProtractorBridge City Tool Works MP-8 Machine Protractor Signature series from 1998. With COA and instructions.  Minty nice never used.

Fine . . . . . $95.00       SOLD!!











Bridge City Tool Works JM-1 Joint Master Guide Block SetBridge City Tool Works JM-1 Joint Master Guide Block Set  Each wooden block is signed "Handsaw / Chisel Guide" in addition to its angle degree cut and BCT name. Minty nice never used!!

Fine . . . . . $75.00       SOLD!!









Bridge City Tool Works JM-1 Joint Maker Guide Bridge City Tool Works JM-1 Joint Maker Guide  2 in their original boxes. Offered in 1999. The perfect tool guide for the perfect cut. Minty nice never used!!

Description from the BCT Legend Page.JM-1 JOINTMAKER Layout your joints (or cuts) traditionally with a marking knife, awl or a pencil. Insert the appropriate guide block in the JM-1 JointMaker body and tighten. Now position the JM-1 JointMaker on your stock and tighten. Saw away, it's that simple! The JM-1 JointMaker guides your saw exactly where you want without slop or wobble. Your sawing rhythm becomes so relaxing and accurate you won't believe the results. All you control is depth of cut, which means you need to pay a little attention and the JM-1 JointMaker does the rest!

Fine . . . . . $75.00      Each      Both SOLD!!







Bridge City Tool Works PB-1 Palm BraceBridge City Tool Works PB-1 Palm Brace Minty nice never used. Signature Series. Produced in 2000.

Fine . . . . . $395.00        SOLD!!









Bridge City Tools MG-2 Marking GaugeBridge City Tools MG-2 Marking Gauge Nice!! Unused. Some box scuffs.

Fine . . . . . $125.00           SOLD!!








Bridge City Tool Works BV-1 Small Bench Vise Set in Original BoxBridge City Tool Works BV-1 Small Bench Vise Set in Original Box Minty nice never used. Signature Series. Produced in 2001. Complete with accessory jaws, pin stops, and more. A lot of thought went into the design of this.

Fine . . . . . $350.00       SOLD!!







Bridge City Tool AM-1 Angle MasterBridge City Tool AM-1 Angle Master This is in very nice condition.  It is a Signature Series issue and dates from 1997.  The collector displayed his Bridge City Tools and stored the boxes elsewhere.  The box for this piece suffered some moisture exposure.  The tool itself looks to be basically unused. The instructions and a booklet on angles are included.   A nice piece.

Good + . . . . . $95.00         SOLD!!






Bridge City Tool CT-4  Angle DividerBridge City Tool CT-4  Angle Divider New in the Box / Unused. It is the Commemorative Tool #4 and dates from 1996. The tool itself looks to be unused. It includes the instructions and the certificate of authenticity.

Fine . . . . . $175.00           SOLD!!








Bridge City Tool MP-8 Machine ProtractorBridge City Tool MP-8 Machine Protractor  This is new in the Box / Unused. It is from the Signature Series and dates from 1998. The tool looks to be unused.  There is some math and equations on here for some precise work. It includes the certificate of authenticity. Nice!!

Fine . . . . . $95.00        SOLD!!






Bridge City Tools JH-1H Steel HammerBridge City Tool JH-1H Steel Hammer   Unused. Minty Nice!! COA. Some box scuffs.

Fine . . . . . $125.00          SOLD!!











Bridge City Tools JH-1S Brass HammerBridge City Tool JH-1S Brass Hammer  Nice!!   Unused. COA. Some box scuffs.

Fine . . . . . $125.00         SOLD!!











Bridge City Tool Works RS-18 Measuring SystemBridge City Tool Works RS-18 Measuring System 3 Triangular rules that are 18" long each and complete with a box of accessories and the roller attachment to facilitate all sorts of different layout situations. Offered in 1998.

From the Legend page on the BCT site.

RS-18 MEASUREMENT SYSTEM It is easy to slide on the RS-18 trammel heads and begin your arc and circle needs. Use the special offset/beam compass rule and you can index the trammel to the rule, making for extremely accurate arcs and circles.Slide the axle and wheels in place on section one of the RS-18 and it will effortlessly glide back and forth allowing you to easily create parallel lines. It works accurately enough to substitute as a marking gage in many applications where a line is needed parallel to an edge or another line. The wheels are neoprene and will not mark your work or paper.

Minty nice never used.

Fine . . . . . $225.00 / Lot       SOLD!!






Bridge City Tool Works PG-27 PantographBridge City Tool Works PG-27 Pantograph Nice unused condition!! No Box. Signature Series. The original owner bought this new in 2001 and it appears to be unused. A useful shop tool!

Fine . . . . . $125.00       SOLD!!








Bridge City Tool FR-1 Rule & CaliperBridge City Tool Works FR-1 Rule & Caliper Super nice unused condition!! The original owner bought this new in 2003 and it appears to be unused. A useful shop tool. Sweet!!

Here is the write-up from the BCT website.

FR-1 | FOLDING RULER & CALIPER When setting up a saw and other woodworking machines, you need a rule that will read from right to left. Few woodworkers relish using a left to right ruler upside down for setting their table saw fence – the FR-1 is the perfect right-to-left reading rule. Flip the FR-1 180 degrees and your 12" left-to-right ruler is ready for use. This is incredibly handy and much more accurate than using a tape measure. The FR-1 also features a small, handy centering rule.

Use this rule to find dead center on stock up to 5" in width without using any math. Align your stock so the same measurement is aligned with the two outside edges and the rule points to center.

Finally, there is a small 120mm rule on one arm for metric measurements. The FR-1 has a feature we have never seen before in similar tools – it works in either the right or left hand! In addition to measuring up to 4" by 32nd’s, the FR-1 will also simultaneously read millimeters.

Concealed in one arm of the FR-1 is a lockable depth stem. Want to check the depth of a mortise? Simply slide the depth stem to the bottom of your mortise, lock in place and use the caliper jaw to read the depth stem (as shown on the cover).

Fine . . . . . $200.00       SOLD!!




Bridge City Tool Works BR-6 Non Glare Triangular Rule Bridge City Tool Works BR-6 Non Glare Triangular Rule  Minty nice never used!!

Fine . . . . . $40.00       SOLD!!









Bridge City Tool Works DC-40 Dividing CompassBridge City Tool Works DC-40 Dividing Compass  1993 Signature Series. Some tarnish otherwise minty nice never used!!

Fine . . . . . $225.00        SOLD!!









Bridge City Tool Works SA-1 Scrach AwlBridge City Tool Works SA-1 Scratch Awl Super nice unused condition!! Signature series. The original owner bought this new in 1993 and it appears to be unused. A useful shop tool. Sweet!!

Fine . . . . . $100.00       SOLD!!







Bridge City Tool Works SA-2 Scratch AwlBridge City Tool Works SA-2 Scratch Awl Minty nice never used.  Rosewood handle.

Fine . . . . . $120.00        SOLD!!









Bridge City Tools PT-1 Trammel PointsBridge City Tool PT-1 Trammel Points Signature Series. 1994. The collectors ID # was 832. Unused. Complete w/ proper original measure stick / rod w/ scale. COA. Some box scuffs.

Fine . . . . . $175.00 w/ rule / stick       SOLD!!








Bridge City Tools DC-40 Dividing CompassBridge City Tool DC-40 Dividing Compass 1993 Signature Series.  Nice!! Unused. Some box scuffs.

Fine . . . . . $195.00        SOLD!!








Bridge City Tools PB-9 Plumb BobBridge City Tool PB-9 Plumb Bob Nice!! Both were out on display and have developed a nice dark patina.  One has a box and paperwork, one does not.

W/B - Fine . . . . . $110.00         SOLD!!

N/B - Fine . . . . . $60.00        SOLD!!





Bridge City Tools MG-2 Marking GaugeBridge City Tool DG-2 Depth Gauge Nice!! Unused. Some box scuffs.

Fine . . . . . $160.00          SOLD!!









Bridge City Tool 1996 Commemorative No. CT-4 Angle DividerBridge City Tool 1996 Commemorative No. CT-4 Angle Divider  Nice!! Great dark patina on a over 25 year old Rosewood & bronze tool. The previous owner bought it new, put it on the bench, and it was left it untouched on the workbench for years after he died. Looks unused. Minty nice!!

Fine . . . . . $140.00          SOLD!!








Bridge City Tools CS-1 Centering ScribeBridge City Tool CS-1 Centering Scribe  Nice!! Bought new in 1993. No signs of use. Original receipt. Some box scuffs.

Fine . . . . . $195.00       SOLD!!









Bridge City Tool Works MG-4 Marking Gage Bridge City Tool Works MG-4 Marking Gage  2001 Signature Series. Minty nice never used!!

Fine . . . . . $145.00       SOLD!!









Bridge City Tool Works TS-1 Jointmakers SquareBridge City Tool Works TS-1 Jointmakers Square Minty nice never used.

Fine . . . . . $75.00            SOLD!!









Bridge City Tool Works JM-6 Paring GuidesBridge City Tool Works JM-6 - 12 - 18 Paring Guide Set   The BCT JM-6 Paring Guide set came as a 3 pieces measuring 6" - 18" and 24". They are 1999 Signature series.

They are set to 88 degree angle for a perfect undercut for joints. They are made of heavy solid metal stock and come in their original box. They have some scratches from moving about in the box, but were bought new and never used.

Here is the description for use from the BCT site. Bridge City Tool Works JM-24, JM-18, JM-6 Paring Guide Set of 3 PRODUCT DESCRIPTION Once clamped in place, you simply work your chisel to the center of your stock thickness from each face with the back of the chisel resting against the guide. Our paring guides will guide your chisel at 88 degrees, creating a perfectly undercut joint. Once assembled, the joints look like they were cut with a laser.

Our step-by-step instructions on how to cut dovetails with the JM-1 and our Paring Guides have several great short cuts that will help you master this enigmatic joint in a single afternoon!

This finely crafted tool will be a fine user.

Fine . . . . . $150.00      SOLD!!






Bridge City Tool Works ST-4 Miter StitchBridge City Tool Works ST-4 Miter Stitch Two sets of 4 in one box. Minty nice never used.Two sets of 4 in one box. Minty nice / never used.

These are used to clamp miter joints. One piece is placed on each miter corner to draw the corners in for gluing. Each piece is sprung to provide strong pressure. Total of 8 pieces meaning two 4-corner boxes can be glued at one time.

Fine . . . . . $100.00 / Lot           SOLD!!






Bridge City Tool Works MG-1 Marking Gage / GaugeBridge City Tool Works MG-1 Marking Gage Gauge in Original Box This gage made it's Bridge City debut in 1989. The gage features a cutting wheel marker which slices the marking line similar to a knife cut. Simply measure the distance from the fence to the cutting wheel and lock the fence with the brass knob.

The fence is 3 3/4" long and inlaid with brass faces on both sides. The beam length allows for a 7 1/2" mark from the fence. The locking knob is knurled brass with inlaid rosewood. This tool was purchased from the estate of a collector who didn't use his tools. This gage is in new unused condition with an original open box. Minty nice and never used.

Fine . . . . . $120.00         SOLD!!





Bridge City Tool Works AS-24 Adjustable Angle SquareBridge City Tool Works AS-24 Adjustable Angle Square   This BCT AS-24 Adjustable Square was bought new and never used. Very Nice!!

This finely crafted tool has pivoting Rosewood heads, and a stainless blade. It will be a fine user tool.

Fine . . . . . $150.00      SOLD!!





Bridge City Tool Works 17 Piece Auger Bit Set in Walnut CaseBridge City Tool Works 17 Piece Auger Bit Set in Walnut Case Unused still in plastic wraps. Made in Japan. Discontinued. Special chuck end will fit in braces or 3 jaw chucks.

Fine . . . . . $475.00           SOLD!!








Bridge City Tool Works Millennium Brace in Walnut CaseBridge City Tool Works Millennium Brace in Walnut Case Issued 2000.  Rosewood. Owner bought the upgraded Walnut box. Minty nice never been used.

Fine . . . . . $675.00           SOLD!!








Bridge City Tool Works MG-2 Marking Gage Gauge in Original BoxBridge City Tool Works MG-2 Marking Gage Gauge in Original Box Some minor tarnish stains but otherwise minty nice and never used. One of the last tools produced in Rosewood.

Fine . . . . . $195.00           SOLD!!








Bridge City Tool Works CT-4 Angle DividerBridge City Tool Works CT-4 Angle Divider Super nice unused condition!! 1996 Commemorative Tool # 4. The original owner bought this new and it appears to be unused. A useful shop tool based on the Langai Patent design angle divider. Sweet!!

Fine . . . . . $150.00








Bridge City Tool Works PD-11 Proportional DividerBridge City Tool Works PD-11 Proportional Divider Signature Series from 2001.In original box with COA & instructions. Minty nice never used!!

Fine . . . . . $195.00          SOLD!!








Bridge City Tool Works MS-96 Precision Measuring StickBridge City Tool Works MS-96 Precision Measuring Stick The BCT MS-96 Precision Measuring Stick was issued in 1999. It is from the signature series. An interesting measurement tool that could be used individually or ganged together with each section having the ability to extend.

Measuring sticks are the easiest, fastest, and most accurate way to transfer length measurements or to check for square on large projects. This Precision Measuring Stick system consists of six interchangeable extruded aluminum bars. Their proprietary, cross-sectional profile provides unprecedented adjustment ease with absolutely ridged joints. The MS-96 "points" are designed to keep the contact faces on an exact centerline. Opposing sliding dovetails "jam" to each other by the locking knobs on a single face of the tool. By making the tool in sections, it can be used to measure from 21" to 97".

Minty nice unused condition in original box.

Fine . . . . . $175.00           SOLD!!



BACK to Tool Archive

This is just a sample of the many antique tools we have sold.
Click link to see other Sales Archive Pages on this Site.

We Buy Quality Antique Tools
Contact Us at AntiqBuyer@gmail.com

Our current offering of Antiques for sale are at our sister Website Patented-Antiques.com.


This website is Copyrighted
Larry & Carole Meeker