This is just a sample of the many
antique edge tools we have sold.
Click link to see other
Past Sales Archive Pages on this Site.
We Buy Quality Antique Tools
Contact Us at
AntiqBuyer@gmail.com
Special Note Concerning Prices Seen Below:
Most prices seen reflect actual sale results from this website.
Prices seen
span a long time and may not reflect current values. Some are selling
for more, many now sell for less.
On other pieces you will see no price, or a price range,
with or without an explanation. The reasons for that are discussed on the FAQ page.
Our current offering of Antiques for sale are at our sister Website Patented-Antiques.com.
Millers
Falls # 2 Carving Set - 6 Rosewood Handle Chisels v& Gouges in Original Box
Nice as they come w/ some minor staining / pits
from storage! The label is not attached to the box or lid.Fine . . . . . . $125.00 SOLD!!
3 Addis Carving Tools Overall condition is very
good. One is stamped just ADDIS, and the other 2 S. J. Addis London.
A 1/2" spoon gouge, and a 1/4 front bent chisel / gouge. & a 1/16"
veiner. Tight cracks in the Walnut? Handles. Nice!! Good + . . . . . $57.00 SOLD!!
4"
Buck Draw Knife
A well made tool and not like those light duty cheap things ones
sees. Nice. Good + . . . . . $45.00 SOLD!!
BUCK-DK
4"
Drawknife This is unmarked as to maker. Handles are
good and tight. There is very light pitting on the back side that can be
dressed out or ignored. Good . . . . . $30.00 SOLD!!
Addis
1 1/2" #21 Front Bent Carving Chisel
Huge
Very Nice!!Fine . . . . . $75.00 SOLD!
10
Carving Tools / Chisels & Gouges Assorted
makes and sizes. Most are Buck Brothers. One is by Addis,
another Barton.
Sold as a lot Nice. Fine . . . . . $175.00 SOLD!!
5 D. R. Barton
/ 1832 Gouges Very good overall condition
gouges by one of the premier 19th century American tool makers. Fruitwood Handles. Largest
2" gouge has a tight handle crack that is stable. The rest are very nice. Largest gouge is 2" down to 1/2".
Good user / workers. Good + . . . . . $275.00 / Lot SOLD!!
3 D.
R. Barton Gouges Clean and nice.
Good user / workers As a lot, or individually below.
3 Good . . . . . $45.00 / Lot SOLD!!
13
Carving Tools / Gouges Assorted
makes and sizes by Addis,
Barton, Buck.
Sold as a lot Nice.
Fine . . . . . $225.00 SOLD!!
Stanley
No. 750 Chisel Set in Box This 3
piece Stanley 750 Chisel set is pretty rare. The box is in pretty
good condition noting some waviness and separation in the paper cover of the
box. Light wear
to the decals on the handles. Otherwise minty nice!! Fine . . . . . $225.00 SOLD!!
12
W. Butcher Gouges in Roll All are nice.
They came together, and all have the same style handles.
Some are sharpened on the inside, other the outside. A nice set. Good + . . . . . $485.00 SOLD!!
Ebony Handle Carving Tools There
are two maker stamps on these but they all came together, and all have the same style
ebony handles.
One handle has a large chip. A nice set.
Good + . . . . . $145.00 / Lot SOLD!!
Marples Limited Edition
6 pc. Rosewood Handle Chisel Set in Box
These vintage Marples chisels look to be of good quality. They
are marked Sheffield England and the sizes are given in inches and
meters. They come with a paper saying they are #117 of 500,
and a limited edition set offered by Woodsmith at some point.
The collector received these as a gift and then never used them.
As nice as one could ask for.
Fine + . . . . . $195.00 SOLD!!
2" D. R. Barton Timber Framer / Shipbuilder Chisel / Slick Early.
Very nice overall condition. No rust or pitting. Handle good
enough. Over 22" long overall.
Good + . . . . . . $80.00 SOLD!!
9 "Two
Cherries" Mortise Chisels Highly
regarded German maker. 3/4" and smaller. Clean & Nice!!
Fine . . . . . $395.00 / Set SOLD!!
5
E. A. Berg Eskilstuna Chisels These
look to have been little used. Note the condition of the decal on
each handle. Some spots of rust that will clean. Nice!Good + . . . . . . $175.00 SOLD!!
12 Pc. Set of Buck Brothers Firmer
Chisels
These chisels are as nice as can
be. They came out of the tool box I am offering separately elsewhere and appear
to have never been used. All have their original grind, and other than some
ever so minor staining are in near mint condition. The largest
is a 2" and graduates down to 1/8
Good + . . . . .$495.00 SOLD
11 Buck
Brothers Crank Neck Paring Chisels
This is a pretty nice set.
The smallest is 1/8" the largest is a 2" There is no slot for the
1 1/2 and the 5/8" is missing. As found with shop made Mahogany
holder. Ready to go
back to work. Good + . . . . .$395.00 SOLD!!
Stanley Everlasting Chisel
Set 9 clean and nice Ever Last firmer chisels.
A good user / worker set. Good + . . . . . $495.00 SOLD!!
Stanley Everlasting Chisel
Set / 8 An assembled set of 8 clean and nice Ever Last
/ Ever Lasting chisels.
A good user / worker set. Good + . . . . . $395.00 SOLD!!
6 Stanley Everlasting Chisels
An assembled set of 6 clean and nice Ever Last
/ Ever Lasting chisels.
The largest has tight cracks in the handle on two sides. A good user / worker set. Good + . . . . . $295.00 SOLD!!
Addis 12 Piece Gouge & Chisel Carving Set in Fitted Box
The pics are individual shots!
Many have the same handles. All are nice. All are Addis. A good assortment.
Includes the mallet seen. Included are#39 Parting Chisel - #2 Skew Chisel - #1 Chisel - #11 Gouge - #21 Front Bent Chisel
#31 Spoon - #2 round Nose Chisel - #31 1/8" - #5 Gouge - #5 Gouge - #21 - Small Gouge
Fine . . . . . . $195.00 / Set SOLD!
6
Marples Carving Tools / Chisels & Gouges
Like new noting tape on handles.
Fine . . . . . $85.00 / Set SOLD!
C.
E. Jennings 12 Piece Set of Firmer Chisels
This exceptional set of firmer chisels buy a well known and respected maker
are in super nice original condition. There are 12 chisels with the sizes
being 1/8, 1/4, 3/8, 1/2, 5/8, 3/4, 7/8, 1, 1 1/4, 1 1/2, 1 3/4. and 2". A
few have seen minimal use. The 2 inch has never been hit. All have been
honed by the previous owner. The condition of all is crisp and clean with no
rust or pitting. The edges of s few of the smaller ones that were used have
tiny flaking on the edge from use and just need to be re-honed. The box is
original and shows some wear but is sound. The labels on inside indicating
the sizes are 95% plus as is the purple background. This set of chisels has
seen little or no use, and will be a fine set for use or the collection.
Excellent . . . . .$495.00 SOLD!
11 Peck
Stow & Wilcox P. S. & W. Firmer Chisels Boxed Set These well
made quality chisels are in their original box. There is a label
on the outside that is mostly unreadable, and another on the inside that
is. The box has some chips and loose joints. Most of the chisels look to have never been struck. All are in fine
condition. A couple are stained and the handle show wear.
Those 2 are not pitted or damaged.
One chisel is missing. The rest are a matched graduated set from
1/8" to 2". Nice.
Good +. . . . . .$395.00 SOLD!!
6 Pexto Flat Firmer Chisels This
is a nice matched set that seems to be missing one. The box is
probably homemade and made to hold 7 but there are only 6 left.
Probably loaned one to the neighbor, or the bad kid left it out in
the yard. Most of the handles look original, and one looks to be a
replacement.
Excellent . . . . .$195.00 SOLD!
Millers
Falls # 107 Carving Tool Set This
vintage chip
carving set of 5 chisels and gouges is in near mint unused condition. The
sharpening stone is still wrapped in its paper. As nice as one could ask
for.
Fine . . . . . . $60.00 SOLD!!
Addis
1" No. 5 Carving Gouge Nice. Fine . . . . . . $35.00 SOLD!!
Riverside Tool Co. 3" Slick / Chisel w/ Anvil Logo
This slick is marked with an anvil as the logo and the word Warranted
below and Trade Mark to either side.There was not a lot of hard info on this tool maker online. I found reference to that logo being Riverside Tools or being a distributor / house brand made by Riverside Tool Co. I found lots of speculation and guesses about it. I have seen / had other tools w/ this logo so their edge tools do turn up.
Some minor spots of of light pitting on the back side and the handles knob was cut off the otherwise nice handle.
Good . . . . . $175.00 SOLD!!
L. & I. J White 3" Timber Framing / Barn Builder / Carpenter Slick
This 3" L. & I. J White 3" has
been dressed and sharpened. It has a new handle. Ready to go!!White . . . . Good + . . . . . $250.00 SOLD!!
2
1/2" James Swan
Timber Framing / Barn Builder / Carpenter Slick
This 2 1/2" James Swan slick has
been dressed and sharpened.
It has a new handle. Ready to go!!Swan . . . . Good + . . . . . 250.00 SOLD!!
L.
& I. J. White 3" Slick Lightly
used. The extra long handle makes the slick look short, it is not.
Approx. 15" w/o the handle. Clean & Nice!!Good + . . . . . $245.00 SOLD!!
L. & I. J. White 2 1/2" Timber Framing Socket Chisel
/ Slick Clean, sharp and nice.
Good user / worker. Good + . . . . . $125.00 SOLD!!
Fulton
3" Slick Some light
pitting on the backside. Very nice original handle. Nice
enough.Good . . . . . $125.00 SOLD!!
L.
& I. J. White 3 1/2" Timber Framers / Ship Builders /
Carpenters Slick A nice heavy duty
timber framers, barn builders, or shipbuilders slick. Near
full length at 16" to the socket. Nice original handle.
Minor spots of pitting as seen. 1837 logo stamp. Very nice. Fine . . . . . $225.00 SOLD!!
3"
Greenlee Slick Original handle,
full length w/
original grind. No rust or pitting, that is just staining.
It had a cosmoline like rust inhibitor
on it when I got it. The handle had not been final fitted
to it and still needs a bit more sizing done to it.
Fine . . . . . $150.00 SOLD!
Hubbard & Co. Middletown CT. 3" Slick
Carpenter / Timber Framing Slick This slick is nice.
Good + . . . $125.00 SOLD!!
L.
& I. J. White 2 1/4" Slick Nice!!Good . . . . . $175.00 SOLD!!
3 1/2"
James Swan Slick Carpenter / Timber Framer Slick
Pretty nice. Good + . . . $225.00 SOLD!!
3 1/2" L. & I. J. White Carpenters / Timber Framing Slick
Pretty nice. Good + . . . $225.00 SOLD!!
6"
Greenlee Slick
This extra wide slick has plenty of life left in it.
There is some pitting on the back side. You do not see many slicks this
wide. The logo is stamped on the front side.
Good + . . . . .$295.00 SOLD
3" Greenlee
Timber Framing / Barn Builder / Carpenter Slick
Nice!! This 3" Greenlee slick has
been dressed and sharpened.
It has a new handle. Ready to go!!Green . . . . Good + . . . . . $195.00 SOLD!!
4 Ward & Payne Sheffield England
Firmer Chisels
These are NOS in their original boxes and a finely made set.
Each appears to be unused. There is a 1/4, 1/2, 3/4, and 1".
These came from a shop that restored English sports cars. As nice as
one could ask for.
Fine + . . . . .$195.00 SOLD!!
11
Pc. Set of Witherby Firmer Chisels / Original Box
These chisels are nice. The handles on some are replacements and some need
to be fitted a little better. Most of the chisels are original to the box
and are a matched set and were bought from Iron Horse auctions back in the early
80's. Most have their original grind, and other than some ever so minor staining
there are no problems with the steel. The largest is a 2"
and graduates down to 1/4" with the 1 1/4" missing. Note two of them are bevel
edge and the rest are flat models. Very Nice!
Good + . . . . .$595.00 SOLD
3 1/2" W. C. Bailey Sag Harbor Tool Co Slick
This is a nice slick by a small but well
known maker.
Good . . . . .$175.00 SOLD
3 5/8" L. I. & J. White Slick
This is a nice slick.
Good . . . . .$250.00 SOLD
L. I. J. & White 3" Slick
Another nice slick by one of the premier and
most respected of makers from the past. It has
a NOS handle in it.
Good . . . . .$195.00 SOLD
"Wetworks Standard" 3" Slick
This slick is very nice and carries a mark
I have never seen before. It looks to be a quality piece.
Good . . . . .$175.00 SOLD
Greenlee 3" Slick This slick is in nice condition. The stamp is way up on the shank and is faint.. No rust, no pitting, and in great condition.
Good . . . . .$150.00 SOLD
Bloomer 2 1/2" Slick
This slick is earlier than most of the ones
above. It is laminated, and in super condition. The collector was very
proud of it and made up a special tag to identify it. Very Nice!!
Good . . . . .$150.00 SOLD
Cleen Cut 3" Slick
This slick is very nice as well. The previous
owner made a very nice and tight fitting metal edge protector for it.
No rust, no pitting, and in great condition. I am not sure if the name is
associated with Keen Kutter and Simmons Hardware or not.
Good . . . . .$150.00 SOLD
Peck Stow & Wilcox No. 1 EX 3"
Timber Framer / Barn Builder / Carpenter Slick
This 3" Peck Stow & Wilcox / P. S. & W 3" Slick has
been dressed and sharpened. It has a new handle. Ready to go!!PSW . . . . Good + . . . . . $195.00 SOLD!!
3" Greenlee
Timber Framing / Barn Builder / Carpenter Slick
Nice!! This 3" Greenlee slick has been dressed
and sharpened. It now has a handle. (See all pics)Green . . . . Good + . . . . . $175.00 SOLD!!
1/2" Berg / Eskilstuna Gouge
This very nice gouge is by the premier maker Berg of Sweden.
You can find the chisels, but the gouges are not seen nearly as
often. There is one spot of tarnish that will lapp out the
first honing. Nice!! Good + . . . . . $50.00 SOLD!
1" Berg / Eskilstuna Gouge
This very nice gouge is by the premier maker Berg of Sweden.
You can find the chisels, but the gouges are not seen nearly as
often. Near Perfect, and a great size. Nice!! Fine . . . . .$75.00 SOLD!
6 Marples Gouge Set The
fellow who owned these liked Marples and Taylor edge tools. He had
others, but you could tell he preferred these. This set is nice and
shows little sign of use.
The largest is 1" and they graduate down.
Fine . . . . .$195.00 SOLD!!
10 Marples
Bevel Edge Bench Chisels This is a very nice
set of Marples bevel edge chisels that looks to have seen little use. The
largest is a 2" then 1 1/2, 1 1/4, 1, 3/4 5/8, 1/2, 3/8, 1/4, 1/8. Each has a
etch with the name, England as the location, and the size in inches and metric on the
blades. The handles are branded with the name Marples. Each chisel is individually pictured in
the links below. Take a look.
Fine . . . . .$395.00 SOLD!
7 Marples Lathe Turning Tools / Chisels & Gouges
Here are 7 Marples Lathe Tools that seem to be a
heavier duty / better quality than those offered above. Each has an
etch with the size info and name. I
believe the handles have been custom turned. Each is individually
pictured through the links below. Fine . . . . .$150.00 SOLD!
Buck Crank Neck
Paring Chisel
This 1 1/4" Crank Neck Paring Chisel is in fine condition. The
stuff you see on the end is tape residue.Fine . . . . .$75.00 SOLD!!
Marples Crank Neck
Paring Chisel
This is 1" and has one spot of pitting on the back.
Good . . . . .$75.00 SOLD!!
Buck Crank Neck
Paring Chisel
This is 11/16" and is looks to have never been used. . Fine . . . . .$75.00 SOLD!!
Buck
Brothers 1 1/2" Crank Neck Paring Chisel
This is nice and has a custom made exotic wood handle w/ silver ferrule. It will be a good user. Very Nice!!Fine . . . . . $95.00 SOLD!!
Buck
Brothers 1" Crank Neck Paring Chisel
Some staining, but it is nice and
will be a good user. Good . . . . . $50.00 SOLD!!
6
Buck Carving Tools / Chisels & Gouges As
a lot, the 6 Buck Brothers Chisels and Gouges & Parting Tool listed individually above. Good + . . . . . $65.00 SOLD!!
L.
I. & J White 1 3/4" Gouge No handle. Fine condition.
Fine . . . . . $45.00 SOLD!!
L.
I. & J. White
1 3/4" Skew Chisel White
was a highly respected maker of edge and other tools in the late 19th century. A pretty nice example!!Good + . . . . . . . $35.00 SOLD!!
3
Corner Chisels Good overall condition.
The top one w/o handle is 1" and the other two are 3/4". I see
maker info of New Haven Tool Co. on one of the 3/4 ones. Good + . . . . . $50.00 / Choice All SOLD!!
1"
Corner Chisel by Buhl & Sons Timber Framing
/ barn building tool. Nice. Good + . . . . . $65.00 SOLD!!
1"
Corner Chisel Early. Nice overall
condition. I see no maker mark. Hand Forged. Good . . . . . . $40.00 SOLD!!
1"
Ohio Tool Co. Corner Chisel This oversize
corner chisel is pretty nice and just needs a new ring at the top of the
handle.
Good . . . . .$95.00 SOLD!!
1
1/4" James Swan Corner Chisel Nice. Good . . . . . $85.00 SOLD!!
Ohio
Tool Co. 1" Corner Chisel Nice enough. Good + . . . . . $55.00 SOLD!!
Witherby 1 1/8" Corner Chisel
A nice heavy duty
timber framers barn building tool. Never sharpened, still has the nib.
Minor pitting as seen. I installed the handle and it needs
to be final fitted. Nice. Good +. . . . . $50.00 SOLD!!
2 Corner Chisels These are both OK,
Little to no pitting. The top one is an 1
1/4 and the other an 1" Cleaned up they will
make for great users in your timber framing project or for just general
mortise and tenon work. Nice!! Left / Top . . . . Good + . . . . .$75.00 SOLD!
Right . . . . Good + . . . . .$95.00 SOLD!!
Wilder
7/8" Corner Chisel Heavy duty
timber framers barn building tool. Wilder is the only name I see
stamped anywhere. Well made & nice. Good +. . . . . $50.00 SOLD!!
Pc. Set of James Swan Firmer Chisels / Original Box These chisels are nice. The handles on some need to be fitted a little better, and some are obvious replacements, but the chisels I believe are original to the box and are a matched set. Most have their original grind, and other than some ever so minor staining there are no problems with the steel. . The largest is a 2" and graduates down to 1/8" Very Nice!
Good + . . . . .$595.00 SOLD
James Swan 1 1/4" Corner Chisel This corner chisel is larger than typically seen and in much nicer condition than most you find these days. Clearly marked Swan with no rust pitting or other problems. A great tool.
Good + . . . . .$125.00 SOLD
12 Buck Brothers Firmer Chisels These chisels are an assemblage that was carefully done. There is a mixture of socket and tang style. Overall they are very nice and will make a great user set. The largest is a 2" and graduates down to 1/4" Very Nice!
Good + . . . . .$295.00 SOLD
3 1/2" D. R. Barton Crank Necked Slick This is a nice slick with the unusual crank neck feature. When do you see them anymore or how many have you ever had a chance to buy. This is the last one from this collection..
Good . . . . .$295.00 SOLD
DELTA Universal Wet Dry Bench Grinder Sharpener Model 23-700
Nice overall condition. No big chips or dings in either wheel. Wheels
run round & true w/o humps, wobble or other issues. I installed a
new brass drain plug. Nice!
Good + . . . . . . 175.00 SOLD!!
This is just a sample of the many
antiques & collectibles we have sold.
Click link to see other
Sales Archive Pages on this Site.
We Buy Quality Antique Tools
Contact Us at
AntiqBuyer@gmail.com