www.AntiqBuyer.com Stanley Rabbet Planes Past Sales

This is just a sample of the many antique Stanley planes we have sold.
Click link to see other Sales Archive Pages on this Site.

We Buy Quality Antique Tools
Contact Us at AntiqBuyer@gmail.com

Special Note Concerning Prices Seen Below:
Most prices seen reflect actual sale results from this website.
Prices seen span a long period of time and may not reflect current values. Some are selling for more, many now sell for less.
On some pieces you will see no price, or a price range, with or without an explanation. The reasons for that are discussed on the FAQ page.

Our current offering of Antiques for sale are at our sister Website Patented-Antiques.com.

Stanley # 9 5/8 Type 1 Tailed Block Plane More than a 9 1/2, but not all there to be a 9 3/4. What is here has a great look. Some would call it a prototype and add a 1 to the price. I'll just go with a 1 of. The type 1 lever cap and tail are proper from a type 1 9 3/4. That is what you are paying for. The rest looks to have originated or been worked on a long, long time ago. Different.

Good + . . . . . . $295.00 SOLD!!

Stanley No. 10 Rabbet Plane A beautiful example. Nice proper era near full length cutter. Beautiful Rosewood Handle & Knob. This No. 10 rabbet plane has been re-japanned with a baked on finish. No rust, pitting, or other damage / issues to speak of. It looks great. Very Nice!

Good + . . . . . $175.00 SOLD!!

Stanley No. 10 1/2 Type 1 Rabbet Plane This is very nice early example of a Stanley type 1 10 1/2 rabbet plane. It is an early type 1 with adjustable throat. No rust or pitting to mention. The Rosewood handle and knob are good. The J logo cutter is nice and near full length. Top shelf condition!!

Fine . . . . . $395.00 SOLD!!

Stanley # 10 1/2 Rabbet Plane Dates from the teens. Overall good. Handle has glue joint. It is solid and OK noting it also has a chip at the top. Cutter has 1/2" or so of life left. Lots of original japanning.

Good + . . . . . . $160.00 SOLD!!

Stanley # 10 Rabbet Plane This #10 looks OK noting the cutter is lightly pitted up at the top and especially on the front side.; It is OK down at the bottom where it matters. Good throat. The Rosewood Handle and knob are nice. There has been some losses to the japanning and nickel. No structural issues, cracks chips or the like. A good user!!

Good . . . . . $135.00 SOLD!!

Stanley No. 10 Rabbet Plane An early example w/ later full length cutter in it. Rosewood handle has a chip at the top. No other structural issues. Plane is in nice overall condition. A good worker.

Good . . . . . $160.00 SOLD!!

Stanley # 10 1/2 Rabbet Plane in Box The box label reads malleable iron. That would make it less susceptible to damage than typical cast iron like cracks that this type of plane was prone to with the cut out sides. USA made, not English. Minty nice.

Fine . . . . . . $375.00 SOLD!!

Stanley # 10 C Corrugated Bottom Rabbit Plane This Stanley # 10 C Corrugated Bottom Rabbit Plane is pretty nice. The paint is about 70 % and was overcoated with a clear coat to keep it from rusting. The later post WWII cutter is near full length and needs to be honed. There is no rust or pitting just a nice even patina. The throat is nice. The corrugations are "right" and original. Nice Rosewood tote & knob. No casting damage or cracks. Nice enough for the shelf or use.

Good + . . . . . . $195.00 SOLD!!

Stanley # 10 Rabbet Plane This No. 10 Stanley rabbet plane is in super condition and dates from pre WWII. Nice Rosewood, 95% or better of the original finish. Shows lite use. No issues. It will make for a great user!

Fine . . . . . $185.00 SOLD!!

Stanley # 10 1/2 C Corrugated Bottom Carriage Makers Rabbet Plane This Stanley # 10 1/2 C corrugated bottom rabbit plane is nice. It dates from the teens or so. The tote is beautiful Rosewood from the period. There is no rust or pitting just normal wear. The throat is OK. The lever cap is nice. Nice full length cutter. No casting damage or cracks. A tough plane to find.

Fine . . . . . . $295.00 SOLD!!

Stanley First Model # 10 1/2 Carriage Makers Rabbet Plane Nice condition. Good Cutter, nice wood, 80% or more japanning. Some staining, and no pitting. A nice example suitable for the collection or use.

Good + . . . . . $250.00 SOLD!!

Stanley # 10 C Corrugated Bottom Carriage Makers Rabbet Plane This is a nice early example of a Stanley # 10 C Corrugated Bottom Rabbet Plane. It has been tastefully cleaned / lapped at some point and looks good. There is 90% of the original japanning or better. I guarantee the grooves are correct, and "right". This plane dates from near or just after the turn of the century . The Rosewood handle and low knob are nice. The cutter is near full length marked with the patent triangular logo and nice. The throat is perfect. Overall a nice looking hard to find plane nice enough for the collection!!

Good + . . . . . . . $350.00 SOLD!!

Stanley # 10 1/2 C Corrugated Bottom Carriage Makers Rabbet Plane This Stanley # 10 1/2 C corrugated bottom rabbit plane is in nice condition. It dates from right after the turn of the century given the B casting mark and Pat 92 cutter. The tote is beautiful Rosewood from the period. There is no rust or pitting just normal wear. The throat is OK. The lever cap is nice. Nice full length cutter. No casting damage or cracks. A good looking example and a tough plane to find.

Good + . . . . . . $300.00 SOLD!!

Stanley # 10 1/2 C Corrugated Bottom Rabbit Plane This Stanley # 10 1/2 C Corrugated bottom Rabbit Plane is OK. The tote has been glued. There is no rust and just a few spots of minor pitting and normal wear. The throat is OK The lever cap has a small flea bites on the leading edge. It is a common size cap and will be easy to change out. No other casting damage or cracks. A tough plane to find.

Good . . . . . . $195.00 SOLD!!

Stanley Type 2 # 10 Carriage Makers Rabbet Plane This is a very early Stanley #10. It is a type 2 dating from 1869 - 1872. That is when Stanley first introduced this plane. I believe it has an early replaced rear handle. The rest of the plane is in pretty nice condition with the collectors trade mark coat of clear lacquer to help preserve it. The cutter is near full length and nice. The solid nut is proper. The solid cap is right. There is no casting damage. There is little to no rust or pitting to speak of. The tag on it indicates it was purchased from Tom Witte, the well known dealer in 1988. A hard to find early model # 10 that deserves a place on the shelf in the next Stanley or antique tool collection.

Good + . . . . . . . $150.00 SOLD!!

Stanley # 10 Pre-lateral Rabbet Plane The Stanley #10 rabbet plane was first introduced in 1869. Stanley introduced the lateral adjustment in 1885. Given that this is a prelateral but has other later features, it would date from approx. 1875 - 1884. There is plenty of life left in the unmarked cutter. The chip breaker is marked with Bailey Patent info. The body is nice and damage free. The japanning is just OK with about 60% or so. The handle and knob are original, correct and nice. Early and nice!

Good + . . . . .$150.00 SOLD!!

Stanley # 10 1/4 Rabbet Plane The Stanley #10 1/4 rabbet / rebate plane was introduced in 1911 and discontinued in 1942 during WWII . It is the same size as the #10 with the added features of tilting handles to add to its user appeal, and the addition of nickers to aid when working across grain. The near full length cutter has a sweetheart logo and is nice. Both the handle and knob are nice with no damage. The japanning is 95% or better and there are no casting problems, rust or pitting. A nice plane!!

Good + . . . . .$495.00 SOLD!!

Stanley # 10 Carriage Makers 'Rabbit Plane This Stanley # 10 Rabbit Plane is a type 10 produced in 1910. The paint is original and 90% or better. The proper marked cutter is near full length and nice. The handle & knob are proper and nice. There is no rust or pitting just a nice even patina. The previous owner did put 4 punch marks in the side rail to ID it, but it will not affect use. It will make for a good user.

Good + . . . . . . $125.00 SOLD!!

Stanley # 10 Rabbet Plane The Stanley #10 rabbet plane was first introduced in 1869. This example with it Patent 92 cutter dates from just before the turn of the century. It is in super original condition. There is plenty of life left in the unmarked cutter. The body is nice and damage free, the japanning is about 90% or so. The handle and knob are original, correct and nice. Early and nice!

Fine . . . . . . $150.00 SOLD!!

Stanley # 10 Carriage Makers Rabbit Plane This is a nice early example of a Stanley # 10 Smooth Bottom Rabbit Plane. It has been tastefully cleaned. There is 90% or more of the original japanning. The Rosewood handle and low knob are nice. The cutter is near full length nice and marked with the patent 92 logo. The throat is perfect. This plane dates from near the turn of the century. Overall a nice looking plane that will be a good user!!

Good + . . . . . . . $175.00 SOLD!!

Stanley #10 1/2 Rabbit Plane This is one of Stanley's most popular models of rabbeting bench planes, and this example still retains 90% or more of its original black japanning. The Sweet Heart era cutter is short with only about 3/8" of life left in it. The throat is perfect, and the sides have been refinished. There is no major damage, casting chips, cracks, welds, repairs or the like. It just must have looked bad to the last owner that he lapped the sides and bottom of this 9" plane. The rosewood handle has a near invisible glue joint 1/2" up from the base. It is lower than normally seen, and if I did not tell you you would hardly know. This Sweet-Heart Era #10 1/2 plane will make a great user so stop using that nice one and put this one back to work.

Good . . . . .$175.00 SOLD

Stanley 1st Model #10 1/2 Rabbit Plane These early versions of Stanley's popular rabbit plane were only made for a short 10 year period ending in 1895 or so. This example is in very nice condition and has no problems with the casting near the cutouts as is often the case. The front moveable portion is nice and operates as it should. There is a very small chip in the edge of the throat, and another minute area in the throat that is dimpled in but not cracked. It is approx 1/8 x 1/4 wide, and this flaw would not interfere with the proper operation and is barely discernable to the eye, but it is there. The handle and knob are very nice and proper. Rare!!

Good . . . . .$295.00 SOLD

Stanley # 10 1/2 Type 1 Rabbit Plane The Stanley #10 1/2 rabbet plane was first introduced in 1885, and came with a moveable front piece to adjust the throat that later versions did not have. From the cutter logo I assume this one dates from near the end of it offering in approx 1895. The body is nice and damage free. The cutter has a little life left in it. The japanning is approx 80% and the wood is nice. Different and nice!

Good + . . . . . .$295.00 SOLD!!

Stanley # 10 1/2 C Corrugated Rabbit Plane The Stanley #10 1/2 rabbet plane was first introduced in 1885, and came with a moveable front piece to adjust the throat that later versions did not have. From the cutter logo I assume this one dates from after 1892 with its Q logo trademark on the cutter, and before the turn of the century. It is not a type 1 with a moveable front piece. It appears it has a later lever cap that was not introduced until the 20's

The body is nice and damage free. The cutter has plenty of life left in it. The japanning is approx 90% or better and the wood is nice. The corrugated version of these planes turn up very infrequently and I guarantee this one to be right. With a proper era cap this would be correct and a plane nice enough for the collection Nice!

Good + . . . . . .$295.00 SOLD!!

Stanley # 10 1/2 Rabbet Plane Dates from near the turn of the century. Overall good. Handle has glue joint. Q trademark cutter has 3/4" or so of life left. Lots of original japanning. A good worker.

Good + . . . . . . $175.00 SOLD!!

Stanley #10 1/4 Tilting Handle Rabbet Plane Stanley only made these planes for a short 5 year span near the turn of the last century. This is a nice example and it still retains 90% or more of its original black japanned finish. The properly marked cutter has over a half inch of usable life left in it. The exposed metal surfaces have a nice even original patina and the nickers are present. The one apology is that the rear handle is a good replacement. It appears that it has been fashioned out of a standard handle, with only the leading edge not having any finish on it after having been cut, being the telling feature or giveaway. It looks good, and this is a hard one to find!

Good . . . . .$475.00 SOLD

Stanley # 10 1/2 Rabbit Plane This #10 1/2 rabbet plane is in very nice condition. The cutter has a lot of life left in it. The sides and bottom are rust and pit free and have been lapped. The japanning is original and 90% or so. The handle is Rosewood, nice, and proper. A very nice example.

Good + . . . . . .$125.00 SOLD!

Stanley # 10 1/2 Rabbit Plane This WWII era Stanley #10 1/2 rabbet plane is in very nice condition. The cutter has a lot of life left in it. The sides and bottom are rust and pit free and this plane does not have any casting problems, cracks or chips. It has been cleaned and looks good. The japanning is original and 90% or so. The handle is painted hardwood, nice, and proper. The blade adjusting wheel is steel. A nice example of a short lived variation of one Stanley's most versatile planes.

Good + . . . . . .$125.00 SOLD!!

Stanley # 10 C Corrugated Bottom Carriage Makers Rabbet Plane This Stanley # 10 C Corrugated Bottom Rabbet Plane in in great condition. The tote and knob are beautiful Rosewood from the period. The lever cap is nice noting a small flea bite in the middle.. Lots of life left in the cutter. No casting damage or cracks.

Good . . . . . . $275.00 SOLD!!

Stanley No. 140 Skew Rabbet Plane This early 140 skew rabbet plane is about as nice as one could ask for. A super condition plane in search of a box. It looks to be unused.

It is an early model with cast adjuster, and the full length cutter has/ fine grooves. Original screws holding the side plate. You just do not find them this nice anymore.

Fine +. . . . . $195.00 SOLD!!

BACK to Stanley Archive

This is just a sample of the many antique tools & planes we have sold.
Click link to see other Sales Archive Pages on this Site.

We Buy Quality Antique Tools
Contact Us at AntiqBuyer@gmail.com

Our current offering of Antiques for sale are at our sister Website Patented-Antiques.com.

Stanley # 10 Series Rabbit & Dado Planes