This is just a sample of the many
antiques & collectibles we have sold.
Click link to see other
Sales Archive Pages on this Site.
We Buy Quality Antique Tools
Contact Us at
AntiqBuyer@gmail.com
Special Note Concerning Prices Seen Below:
Most prices seen reflect actual sale results from this website.
Prices seen
span a long time and may not reflect current values. Some are selling
for more, many now sell for less.
On other pieces you will see no price, or a price range,
with or without an explanation. The reasons for that are discussed on the FAQ page.
Our current offering of Antiques for sale are at our sister Website Patented-Antiques.com.
Stanley
# 850 Roll-Up Tool Cabinet The collector
spent a lot of time filling this tool box up with proper era Stanley Tools.
Most are Stanley, and most date from the correct pre WWII era. A few
are a bit later. Most are in pretty good condition. Good +. . . . . $450.00 w/ Pictured Tools SOLD!!
Stanley
# 850 Roll Top Tool Box Stanley offered these unusual roll top
tool boxes in two different sizes and this is the larger 29" tall model. It
is made of Oak. It has some minor water stains on the top and side and would
benefit greatly from a light refinishing. The roll top looks great and
works very well. They make for a great display for nice tools either to use
or show off, or you can take on the challenge of trying to find all the original
tools that were included and bring it back to its original glory.
Good + . . . . .$325.00 SOLD
19 Stanley Tools Educational Dept.
Double Sided Poster Boards / Charts There are 19 double sided
pages total approx. 24" x 18.5" each. Meaning 38 charts all told. Covers many
important topics about woodworking with Stanley Tools. Planes, Chisels, Saws,
Drills, Bevels, Joints Sharpening and more are all covered. I believe they date from the 50s or so.
Pretty good overall condition noting many of the grommets are missing at the tops and some have some tearout in that area. Also some minor water stains along the right side on some and bumped corners.
Good . . . . . $245.00 SOLD!!
Stanley
96 Blind Nail Chisel Gauge With Composition 1/4" Stanley # 40
chisel. Nice!!Fine . . . . . $150.00 SOLD!!
Stanley
# 1 Odd Jobs The Stanley No. 1 Odd Jobs tool
was billed as the do-all combo tool. This measuring and marking tool can do it all! It's an inside
miter and try square, depth gauge, scribing tool for arcs and circles,
T-square, plumb level, depth marking scribe and more. Proper size
rules can be had from Garrett Wade. Nice. Good + . . . . . $125.00 SOLD!!
Stanley
No. 1 Odd Jobs w/ Rule Proper rule.
Proper scribe and proper pencil holder. Good Bubble, and good nickel. A very nice example.
Good + . . . . . 175.00 SOLD!!
Stanley No. 44 Bit & Square Level In fine as new condition.
Good bubble. Thumbscrew is marked.Fine . . . . . $40.00 SOLD!!
Stanley
# 1 Odd Job These were touted as the
tool that could just about do it all. Until you lost the rule
which is always missing. I have it mounted on a 62 C which it will fit
on, but is not the standard rule, proper or included. Good + . . . . . .$125.00 SOLD
Stanley
No. 1 Type 1 Odd Job Stanley
introduced this unusual tool in 1888 and first models like this had just one
patent date and did not come with a rule according to John Walter.
Replacement rules can be ordered from Garrett Wade. They were
something like 8 tools in one if you could count them all. Nice
enough.Good . . . . . $95.00 SOLD!!
Stanley
Brass Trammel Points w/ Pencil Holder Dirty but
Nice. Original and proper keepers. Screw in pencil holder. Will clean to be
fine.Good + . . . . . $65.00 SOLD!!
Stanley
Bronze # 2 Trammel Points w/ Pencil Holder Fine condition.
Original Keepers. Good Points. Very nice.Fine . . . . . $100.00 SOLD!!
Stanley
#5 Nickel Plated Cast Iron Plumb Bob
80% or better of the original plating. Good point. Marked wheel. Nice
overall condition. Good + . . . . . $75.00 SOLD!!
8
Stanley #720 Firmer Chisels These chisels
sat on the collectors shelf for the last 20 years or so. The only wear or
tear they show is shelf wear and a bit of rust stains from sitting on the shelf.
I cleaned them, and a couple have ever so light pitting but it is very minor.
It will polish out or not be a factor in their use. They have their original
grinds and simply need a honing. They range in size from 1/4" to the
largest which is 2". Use to be you could find these Stanley chisels, but those
days are gone and it will be a while before you see a set as nice appear again.
Very Nice!
Good + . . . . .$395.00 SOLD
8
Stanley #720 Firmer Chisels They have their original
grinds and simply need a honing. They range in size from 1/4" to the
largest which is 2". Very Nice!
Good + . . . . .$395.00 SOLD
Stanley #60
Butt Chisels These chisels
mark the end of an era for Stanley edge tools.
Very Nice!
Good + . . . . .$125.00 SOLD
2
Stanley 3/4 Inch Everlast Chisels Nice, and good
users. From the top down. From the top
Good . . . . . . $25.00 SOLD!!
Good + . . . . . . $35.00 SOLD!!
Stanley
# 40 1" Everlasting Chisel
Long & Nice. Good +. . . . . $45.00 SOLD!!
Stanley 1/4" #40
EverLasting Chisel This long Stanley pocket
chisel is very nice
with light staining!! Good + . . . . . . $60.00 SOLD!!
Stanley 1/2" #20 EverLast Chisel This
larger firmer chisel has the bottle style handle. It is used, but
OK.
Good . . . . . . $60.00 SOLD!!
2
Stanley 1/2 Inch Everlasting Chisels Nice, and good
users. From the top down.
Good . . . . . . $25.00 SOLD!!
Good + . . . . . . $40.00 SOLD!!
Stanley
Sweetheart Era # 40 Everlasting 3/8" Chisel
Very Nice!!. Good +. . . . . $50.00 SOLD!!
Stanley 5/16" No. 40 Everlasting Chisel Clean and sharpened.
Good user / worker. 5/16" Good . . . . . $40.00 SOLD!!
Stanley
1" No. 40 Everlasting Chisel Clean and sharpened.
Good user / worker. 1" Good . . . . . $40.00 SOLD!!
Stanley
3/4" No. 40 Everlasting Chisel Clean and
nice. Good user / worker. 3/4" Good + . . . . . $45.00 SOLD!!
8
Piece Set of Stanley #720 Firmer Chisels Here
is one of the nicest 8 piece sets of Stanley's long 720 socket firmer
chisels you will see in a long time. The box is homemade and has served to
protect the chisels from the ravages of the tool box.. The handles are all
original, with one being a few shades lighter in color. This is not a
married up or assembled set, they were all found together as a set. All are
marked Stanley & 720 the same way.Some of the chisels have never been used, some show slight evidence of being struck once or twice. None of the chisels has ever been honed and all of the bevels have the original factory grind. The 3/4 and 1 1/4 show the most signs of use and should be honed before use. Both are still fine at least. There is no rust or pitting, and these did not even need to be cleaned. They are original. In his book / price guide John Walters doesn't mention a 2 inch size but here is one in mint condition. A superb set of one of Stanley's finest chisels. Very Nice!!.
Excellent . . . . .$495.00 SOLD!
Stanley Everlasting Chisels in Original
Wrapper As nice as one could ask for. The plastic handles from
the 30's are still in fine condition as are the chisels themselves.
Good . . . . .$325.00 SOLD
Stanley
# 77 Dowel Making Machine
With standard 3/8" cutter. Some paint loss to the main
flywheel, but runs fine.
These devices turn out an interesting product at a fraction of the cost if you
had to buy exotic wood dowels. If you could even find them. 9
different size cutters were available. Put it back to work.Good + . . . . . $275.00 SOLD!!
Stanley # 77 Dowel & Rod Making Machine w/ 3 Cutters This
interesting and useful tool looks to have seen little use. They
turn out an interesting & useful product. Very Nice!! Fine . . . . . . $375.00 w/ 3/8" Cutter . . . . . . w/ all 3 Cutters . . . . . $575.00 SOLD!!
1/2" Cutter . . . . . Fine . . . . . . $125.00 SOLD!!
3/4" Cutter . . . . . . Fine . . . . . . $125.00 SOLD!!
Stanley #
77 Dowell Cutting Machine w 9 Cutters in Box
All appear to be near unused. No rust pitting or damage. 98% or better original
japanning. Box label is faded. 9 cutter 8 in the box. None
nicer.
Fine . . . . . . $1450.00 SOLD!!
Stanley # 77 Dowel Making Machine w/ 3/8"
Cutter Clean & Nice!!
It has the 3/8" inch cutter. It is in fine condition.Good + . . . . . $395.00 SOLD!!
Stanley
No. 67 Universal Rabbet Spoke Shave This Stanley
No. 67 Universal Rabbet shave has both the round and flat bottoms as
well as the fence. The cutter is 1 7/8' wide and marked with the patent
info making it an earlier version. One handle ferrule is split, but
tight. Nice original condition! Will clean to be nicer. Good + . . . . . $120.00 SOLD!!
Stanley
# 42 Saw Set in Original Box w/ Instructions
This is in like new never or seldom used
condition. Nice!!
Fine + . . . . . . $45.00 SOLD!!
Stanley
# 42 X Saw Set in Original Box w/ Instructions
This is in like new never or seldom used
condition. Nice!!
Fine + . . . . . . $85.00 SOLD!!
Stanley
42 X Saw Set in Box Nice.
Marked 42 X on the inside of the handle. Includes the accessory for circular blades and an original instruction
pamphlet. Carefully checked out and all is good. Fine . . . . . 75.00 SOLD!!
Stanley
42 SS / W Saw Set in Box Nice. Box marked 42 SS.
Marked 42 W on the inside of the handle. Box has seen better days. Includes an original instruction sheet. Fine . . . . . $50.00 SOLD!!
Stanley
42 Saw Set in Box Nice.
Marked 42 on the inside of the handle. Box has seen better days. Includes an original instruction
sheet. Carefully checked out and all is good. Fine . . . . . $50.00 SOLD!!
Stanley
98 Double Stem Marking Gauge
Minor nickel loss and needs a light clean. Nice!! Good + . . . . . $30.00 SOLD!!
Stanley 97 Double End Marking Gauge Wheel at one end
pointer at other. Sweetheart era. Nice!
Good + . . . . . $30.00 SOLD!!
Stanley Excelsior Patent Tool Handle
The condition of the handle itself is near mint. Problem is the
tools are gone. . Nice!
Fine . . . . .$55.00 SOLD!
Stanley
# 203 Bench Clamps These are used to
hold down your work and can be mounted along the edge of the bench
Handy. Good . . . . . .$75.00 SOLD
Stanley
No. 203 Bench Clamps (2) Some shelf dust
and minor chipping to the japanned finish.
Otherwise like new.Fine . . . . . $95.00 / pr.
Stanley
#30 Sweetheart Era Angle Divider
This Stanley #30 is in like new condition. The fence / bar is
proper and has the Sweetheart logo dating this from the 20's - 30's.
Very Nice!!.
Good + . . . . . .$75.00 SOLD!
3 Stanley
# 12 Squares in Original Box These came
out of a school manual arts department after they cancelled the wood
shop. Good + . . . . . .$75.00 SOLD
Stanley
# 60 Marking Gauge This is an early and hard
to find Stanley piece. It was discontinued early on for other designs
and is quite hard to find. Good + . . . . . .$45.00 SOLD
Stanley #
60 Marking & Cutting Gauge These all
iron marking gauges were offered for a bit over 20 years and date back to the
late 1800s. Pretty nice!Good + . . . . . $45.00 SOLD!!
Stanley No. 85 1/2 Rosewood Panel Marking Gauge - Aug. 5, 1873 Patent This
marking gauge is in exceptionally fine condition. Unmarked but nearly all
known examples are not. Original keeper and no apologies.A very nice example of a hard to find Stanley Tool in exceptional condition for use or the collection.
Fine . . . . . $145.00 SOLD!!
Stanley No.
77 Rosewood Marking & Mortise Gauge / Gage
This Rosewood marking gage is in better than good useable condition. It is very nice.
It is marked on the head Stanley No. 77. Good points. Nice original keeper. A very nice example for use or the collection.
Fine . . . . . $60.00 SOLD!!
Stanley No.
77 Rosewood Marking & Mortise Gauge / Gage
This No. 77 dates from the Sweetheart era, c. 1920s -
1930s. This Rosewood marking gage is in fine little used condition.
It is marked on the head Stanley No. 77. Good points. Nice original keeper. A very nice example for use or the collection.
Fine . . . . . $70.00 SOLD!!
Stanley No.
77 Rosewood Marking & Mortise Gauge / Gage
This Rosewood marking gage is in good useable condition. It is marked on the head Stanley No. 77. Good points.
original keeper. A very nice example for use or the collection.
Good + . . . . . $45.00 SOLD!!
Stanley
No. 165 Boxwood Marking Gauge w/ Brass Fence The brass fence or
guide is for concave / convex circular work and is the difference from the typical No. 65
gauge. Sweetheart era Boxwood. Good point. Little used.
Very nice!! Fine . . . . . $40.00 SOLD!!
Stanley
No. 70 1/2 Cutting Gauge Unusual w/ knob. Beech. Good blade / cutter. For
heavier work or slitting veneer. Pretty nice!!
Good + . . . . . $75.00 SOLD!!
Stanley
Golden Hammer These were given out in
schools for work well done in wood shop class. i never got one,
but my brother in law did. They are pretty hard to find.
Excellent . . . . . .$125.00 SOLD
2
Stanley # 92 Marking Gauges
Both nice, and both complete with the original wear guide in place. Both
are hard to find, and these were Stanley's top of the line and made to last a lifetime.
# 92 Stanley Gauges . . . . . .$95.00 Both SOLD!
Stanley #
66 Scraper / Beader
This # 66 Scraper is in about as nice condition as
one could ask for. It retains 95% or better of its original
nickel plating. There is one Sweetheart marked cutter and one fence. Pictured
in the pic above. A nice example. Super!!
Fine. . . . . . . . $75.00 SOLD!!
Stanley #
66 Scraper / Beader
Each has just one cutter!! CLM-S66
Fine . . . . Nickel . . . . . . . . $75.00 SOLD!!
Fine . . . . Japanned . . . . . . . . $75.00 SOLD!!
Good + w/ Nickel Loss . . . . . . . . $30.00 SOLD!!
Stanley
151 Spoke Shave Nice. Good + . . . . . $35.00 SOLD!!
Hot
Dog Handle for Stanley # 9 Cabinet Makers Plane
Original, not aftermarket. Nice
with one spot of rust. Oftentimes missing. Good +. . . . . $250.00 SOLD!!
Stanley
No. 100 Miter Machine Excellent little
used condition. Stanley offered these miter clamping machines for
about 70 years after buying out the Marsh Tool Co in 1926. This is an
earlier version in black finish. They
offered 2 models to be used with or without a saw. The No. 100
being the one that used a saw as well as having the miter clamp feature.
Saws that will fit are offered below separately. Good + . . . . . $100.00 SOLD!!
Stanley
386 Jointer Plane Fence Complete
and nice.
Good . . . . . $120.00 SOLD!!
Stanley #
386 Jointer Plane Fence For use with any
jointer plane, the #386 Plane Fence is designed to clamp onto the side of
most any jointer plane and
allows the user to keep the planed surface square to the sides, or in
door hanging, adjusted to put a slight a bevel on the door edge. Very Nice!! Good + . . . . . . $125.00 SOLD!!
Stanley No. 386 Jointer Plane Fence
Nice enough. Solid and complete with some loss to the nickel..
Good + . . . . . $125.00 SOLD!!
Stanley No. 386 Jointer Plane Fence in Original Box Mint in the box. None nicer!!Fine . . . . . 250.00 SOLD!!
Stanley No. 386 Jointer Plane Fence Very
nice!!
Fine . . . . . $120.00 SOLD!!
This is just a sample of the many
antiques & collectible tools we have sold.
Click link to see other
Sales Archive Pages on this Site.
We Buy Quality Antique Tools
Contact Us at
AntiqBuyer@gmail.com
Our current offering of Antiques for sale are at our sister Website Patented-Antiques.com.
This website is Copyrighted
Larry & Carole Meeker